Elastic
Start free trial Contact Sales
Loading

Cisco ISE

<div class="condensed-table">
| | |
| --- | --- |
| Version | 1.24.2 (View all) |
| Compatible Kibana version(s) | 8.11.0 or higher |
| Supported Serverless project types
What’s this? | Security
Observability |
| Subscription level
What’s this? | Basic |
| Level of support
What’s this? | Elastic |

</div>
The Cisco ISE integration collects and parses data from Cisco Identity Services Engine (ISE) using TCP/UDP.

This module has been tested against Cisco ISE server version 3.1.0.518.

  • Enable the integration with the TCP/UDP input.

  • Sign in to Cisco ISE Portal.

  • Configure Remote Syslog Collection Locations.

    • Procedure

      1. In Cisco ISE Administrator Portal, go to Administration > System > Logging > Remote Logging Targets.
      2. Click Add. image::images/cisco_ise/cisco-ise-setup.png[Cisco ISE server setup image]
      3. Enter all the Required Details.
      4. Set the maximum length to 8192.
      5. Click Submit.
      6. Go to the Remote Logging Targets page and verify the creation of the new target.
  • It is recommended to have 8192 as Maximum Message Length. Segmentation for certain logs coming from Cisco ISE might cause issues with field mappings.

Reference link for Cisco ISE Syslog: Here

This is the log dataset.

**Example**

An example event for log looks as following:

{
    "@timestamp": "2020-02-21T19:13:08.328Z",
    "agent": {
        "ephemeral_id": "1c70d737-7545-456d-8fb9-7033dca67ed3",
        "id": "901f4c48-583a-4848-aa7b-89dc8e9c4b76",
        "name": "docker-fleet-agent",
        "type": "filebeat",
        "version": "8.10.2"
    },
    "cisco_ise": {
        "log": {
            "acct": {
                "request": {
                    "flags": "Stop"
                }
            },
            "acs": {
                "session": {
                    "id": "ldnnacpsn1/359344348/952729"
                }
            },
            "authen_method": "TacacsPlus",
            "avpair": {
                "priv_lvl": 15,
                "start_time": "2020-03-26T01:17:12.000Z",
                "task_id": "2962",
                "timezone": "GMT"
            },
            "category": {
                "name": "CISE_TACACS_Accounting"
            },
            "cmdset": "[ CmdAV=show mac-address-table <cr> ]",
            "config_version": {
                "id": 1829
            },
            "cpm": {
                "session": {
                    "id": "81.2.69.144Accounting306034364"
                }
            },
            "device": {
                "type": [
                    "Device Type#All Device Types#Routers",
                    "Device Type#All Device Types#Routers"
                ]
            },
            "ipsec": [
                "IPSEC#Is IPSEC Device",
                "IPSEC#Is IPSEC Device"
            ],
            "location": [
                "Location#All Locations#EMEA",
                "Location#All Locations#EMEA"
            ],
            "message": {
                "code": "3300",
                "description": "Tacacs-Accounting: TACACS+ Accounting with Command",
                "id": "0000000001"
            },
            "model": {
                "name": "Unknown"
            },
            "network": {
                "device": {
                    "groups": [
                        "Location#All Locations#EMEA",
                        "Device Type#All Device Types#Routers",
                        "IPSEC#Is IPSEC Device"
                    ],
                    "name": "wlnwan1",
                    "profile": [
                        "Cisco",
                        "Cisco"
                    ]
                }
            },
            "port": "tty10",
            "privilege": {
                "level": 15
            },
            "request": {
                "latency": 1
            },
            "response": {
                "AcctReply-Status": "Success"
            },
            "segment": {
                "number": 0,
                "total": 4
            },
            "selected": {
                "access": {
                    "service": "Device Admin - TACACS"
                }
            },
            "service": {
                "argument": "shell",
                "name": "Login"
            },
            "software": {
                "version": "Unknown"
            },
            "step": [
                "13006",
                "15049",
                "15008",
                "15048",
                "13035"
            ],
            "type": "Accounting"
        }
    },
    "client": {
        "ip": "81.2.69.144"
    },
    "data_stream": {
        "dataset": "cisco_ise.log",
        "namespace": "ep",
        "type": "logs"
    },
    "destination": {
        "ip": "81.2.69.144"
    },
    "ecs": {
        "version": "8.11.0"
    },
    "elastic_agent": {
        "id": "901f4c48-583a-4848-aa7b-89dc8e9c4b76",
        "snapshot": false,
        "version": "8.10.2"
    },
    "event": {
        "action": "tacacs-accounting",
        "agent_id_status": "verified",
        "category": [
            "configuration"
        ],
        "dataset": "cisco_ise.log",
        "ingested": "2023-10-03T09:31:56Z",
        "kind": "event",
        "original": "<182>Feb 21 19:13:08 cisco-ise-host CISE_TACACS_Accounting 0000000001 4 0 2020-02-21 19:13:08.328 +00:00 0018415781 3300 NOTICE Tacacs-Accounting: TACACS+ Accounting with Command, ConfigVersionId=1829, Device IP Address=81.2.69.144, CmdSet=[ CmdAV=show mac-address-table <cr> ], RequestLatency=1, NetworkDeviceName=wlnwan1, Type=Accounting, Privilege-Level=15, Service=Login, User=psxvne, Port=tty10, Remote-Address=81.2.69.144, Authen-Method=TacacsPlus, AVPair=task_id=2962, AVPair=timezone=GMT, AVPair=start_time=1585185432, AVPair=priv-lvl=15, AcctRequest-Flags=Stop, Service-Argument=shell, AcsSessionID=ldnnacpsn1/359344348/952729, SelectedAccessService=Device Admin - TACACS, Step=13006, Step=15049, Step=15008, Step=15048, Step=13035, NetworkDeviceGroups=Location#All Locations#EMEA, NetworkDeviceGroups=Device Type#All Device Types#Routers, NetworkDeviceGroups=IPSEC#Is IPSEC Device, CPMSessionID=81.2.69.144Accounting306034364, Model Name=Unknown, Software Version=Unknown, Network Device Profile=Cisco, Location=Location#All Locations#EMEA, Device Type=Device Type#All Device Types#Routers, IPSEC=IPSEC#Is IPSEC Device, Response={AcctReply-Status=Success; }, Network Device Profile=Cisco, Location=Location#All Locations#EMEA, Device Type=Device Type#All Device Types#Routers, IPSEC=IPSEC#Is IPSEC Device, Response={AcctReply-Status=Success; }",
        "sequence": 18415781,
        "timezone": "+00:00",
        "type": [
            "info"
        ]
    },
    "host": {
        "hostname": "cisco-ise-host"
    },
    "input": {
        "type": "filestream"
    },
    "log": {
        "file": {
            "device_id": 2080,
            "inode": 88860,
            "path": "/tmp/service_logs/log.log"
        },
        "level": "notice",
        "offset": 71596,
        "syslog": {
            "priority": 182,
            "severity": {
                "name": "notice"
            }
        }
    },
    "message": "2020-02-21 19:13:08.328 +00:00 0018415781 3300 NOTICE Tacacs-Accounting: TACACS+ Accounting with Command, ConfigVersionId=1829, Device IP Address=81.2.69.144, CmdSet=[ CmdAV=show mac-address-table <cr> ], RequestLatency=1, NetworkDeviceName=wlnwan1, Type=Accounting, Privilege-Level=15, Service=Login, User=psxvne, Port=tty10, Remote-Address=81.2.69.144, Authen-Method=TacacsPlus, AVPair=task_id=2962, AVPair=timezone=GMT, AVPair=start_time=1585185432, AVPair=priv-lvl=15, AcctRequest-Flags=Stop, Service-Argument=shell, AcsSessionID=ldnnacpsn1/359344348/952729, SelectedAccessService=Device Admin - TACACS, Step=13006, Step=15049, Step=15008, Step=15048, Step=13035, NetworkDeviceGroups=Location#All Locations#EMEA, NetworkDeviceGroups=Device Type#All Device Types#Routers, NetworkDeviceGroups=IPSEC#Is IPSEC Device, CPMSessionID=81.2.69.144Accounting306034364, Model Name=Unknown, Software Version=Unknown, Network Device Profile=Cisco, Location=Location#All Locations#EMEA, Device Type=Device Type#All Device Types#Routers, IPSEC=IPSEC#Is IPSEC Device, Response={AcctReply-Status=Success; }, Network Device Profile=Cisco, Location=Location#All Locations#EMEA, Device Type=Device Type#All Device Types#Routers, IPSEC=IPSEC#Is IPSEC Device, Response={AcctReply-Status=Success; }",
    "related": {
        "hosts": [
            "cisco-ise-host"
        ],
        "ip": [
            "81.2.69.144"
        ],
        "user": [
            "psxvne"
        ]
    },
    "tags": [
        "preserve_original_event",
        "forwarded",
        "cisco_ise-log"
    ],
    "user": {
        "name": "psxvne"
    }
}
**Exported fields**
Field Description Type
@timestamp Event timestamp. date
cisco_ise.log.acct.authentic keyword
cisco_ise.log.acct.delay_time long
cisco_ise.log.acct.input.octets long
cisco_ise.log.acct.input.packets long
cisco_ise.log.acct.output.octets long
cisco_ise.log.acct.output.packets long
cisco_ise.log.acct.request.flags keyword
cisco_ise.log.acct.session.id keyword
cisco_ise.log.acct.session.time long
cisco_ise.log.acct.status.type keyword
cisco_ise.log.acct.terminate_cause keyword
cisco_ise.log.acme-av-pair.audit-session-id keyword
cisco_ise.log.acme-av-pair.service-type keyword
cisco_ise.log.acs.instance keyword
cisco_ise.log.acs.session.id keyword
cisco_ise.log.active_session.count long
cisco_ise.log.ad.admin keyword
cisco_ise.log.ad.domain.controller keyword
cisco_ise.log.ad.domain.name keyword
cisco_ise.log.ad.error.details keyword
cisco_ise.log.ad.forest keyword
cisco_ise.log.ad.hostname keyword
cisco_ise.log.ad.ip ip
cisco_ise.log.ad.log keyword
cisco_ise.log.ad.log_id keyword
cisco_ise.log.ad.organization_unit text
cisco_ise.log.ad.site keyword
cisco_ise.log.ad.srv.query keyword
cisco_ise.log.ad.srv.record keyword
cisco_ise.log.adapter_instance.name keyword
cisco_ise.log.adapter_instance.uuid keyword
cisco_ise.log.admin.interface keyword
cisco_ise.log.admin.session keyword
cisco_ise.log.airespace.wlan.id long
cisco_ise.log.allow.easy.wired.session keyword
cisco_ise.log.allowed_protocol.matched.rule keyword
cisco_ise.log.assigned_targets keyword
cisco_ise.log.auth.policy.matched.rule keyword
cisco_ise.log.authen_method keyword
cisco_ise.log.authentication.identity_store keyword
cisco_ise.log.authentication.method keyword
cisco_ise.log.authentication.status keyword
cisco_ise.log.average.radius.request.latency long
cisco_ise.log.average.tacacs.request.latency long
cisco_ise.log.avpair.disc.cause long
cisco_ise.log.avpair.disc.cause_ext long
cisco_ise.log.avpair.elapsed_time long
cisco_ise.log.avpair.pre_session_time long
cisco_ise.log.avpair.priv_lvl long
cisco_ise.log.avpair.start_time date
cisco_ise.log.avpair.stop_time date
cisco_ise.log.avpair.task_id keyword
cisco_ise.log.avpair.timezone keyword
cisco_ise.log.called_station.id keyword
cisco_ise.log.calling_station.id keyword
cisco_ise.log.calling_station_id keyword
cisco_ise.log.category.name keyword
cisco_ise.log.cause keyword
cisco_ise.log.cisco_av_pair.coa-push boolean
cisco_ise.log.cisco_av_pair.cts-device-capability keyword
cisco_ise.log.cisco_av_pair.cts-environment-data keyword
cisco_ise.log.cisco_av_pair.cts-environment-version keyword
cisco_ise.log.cisco_av_pair.cts-pac-opaque keyword
cisco_ise.log.class keyword
cisco_ise.log.client.latency long
cisco_ise.log.cmdset keyword
cisco_ise.log.component keyword
cisco_ise.log.config_change.data keyword
cisco_ise.log.config_version.id long
cisco_ise.log.connectivity keyword
cisco_ise.log.cpm.session.id keyword
cisco_ise.log.currentid.store_name keyword
cisco_ise.log.delta.radius.request.count long
cisco_ise.log.delta.tacacs.request.count long
cisco_ise.log.detailed_info text
cisco_ise.log.details keyword
cisco_ise.log.device.name keyword
cisco_ise.log.device.registration_status keyword
cisco_ise.log.device.type keyword
cisco_ise.log.dtls_support keyword
cisco_ise.log.eap.authentication keyword
cisco_ise.log.eap.chaining_result keyword
cisco_ise.log.eap.tunnel keyword
cisco_ise.log.eap_key.name keyword
cisco_ise.log.enable.flag keyword
cisco_ise.log.endpoint.coa keyword
cisco_ise.log.endpoint.mac.address keyword
cisco_ise.log.endpoint.policy keyword
cisco_ise.log.endpoint.profiler keyword
cisco_ise.log.endpoint.purge.id keyword
cisco_ise.log.endpoint.purge.rule keyword
cisco_ise.log.endpoint.purge.scheduletype keyword
cisco_ise.log.ep.identity_group keyword
cisco_ise.log.ep.mac.address keyword
cisco_ise.log.error.message keyword
cisco_ise.log.error_message keyword
cisco_ise.log.event.timestamp date
cisco_ise.log.failure.flag boolean
cisco_ise.log.failure.reason keyword
cisco_ise.log.failure_reason keyword
cisco_ise.log.feed_service.feed.name keyword
cisco_ise.log.feed_service.feed.version keyword
cisco_ise.log.feed_service.host keyword
cisco_ise.log.feed_service.port keyword
cisco_ise.log.feed_service.query.from_time date
cisco_ise.log.feed_service.query.to_time date
cisco_ise.log.file.name keyword
cisco_ise.log.first_name keyword
cisco_ise.log.framed.ip ip
cisco_ise.log.framed.mtu long
cisco_ise.log.groups.process_failure boolean
cisco_ise.log.guest.user.name keyword
cisco_ise.log.identity.group keyword
cisco_ise.log.identity.policy.matched.rule keyword
cisco_ise.log.identity.selection.matched.rule keyword
cisco_ise.log.ipsec keyword
cisco_ise.log.is_third_party_device_flow boolean
cisco_ise.log.ise.policy.set_name keyword
cisco_ise.log.last_name keyword
cisco_ise.log.local_logging keyword
cisco_ise.log.location keyword
cisco_ise.log.log_details flattened
cisco_ise.log.log_error.message keyword
cisco_ise.log.log_severity_level keyword
cisco_ise.log.logger.name keyword
cisco_ise.log.message.code keyword
cisco_ise.log.message.description text
cisco_ise.log.message.id keyword
cisco_ise.log.message.text keyword
cisco_ise.log.misconfigured.client.fix.reason keyword
cisco_ise.log.model.name keyword
cisco_ise.log.nas.identifier keyword
cisco_ise.log.nas.ip ip
cisco_ise.log.nas.port.id keyword
cisco_ise.log.nas.port.number long
cisco_ise.log.nas.port.type keyword
cisco_ise.log.nas_identifier keyword
cisco_ise.log.nas_ip_address keyword
cisco_ise.log.network.device.groups keyword
cisco_ise.log.network.device.name keyword
cisco_ise.log.network.device.profile keyword
cisco_ise.log.network.device.profile_id keyword
cisco_ise.log.network.device.profile_name keyword
cisco_ise.log.network_device_ip ip
cisco_ise.log.network_device_name keyword
cisco_ise.log.object.internal.id keyword
cisco_ise.log.object.name keyword
cisco_ise.log.object.type keyword
cisco_ise.log.objects.purged keyword
cisco_ise.log.openssl.error.message keyword
cisco_ise.log.openssl.error.stack keyword
cisco_ise.log.operation.id keyword
cisco_ise.log.operation.status keyword
cisco_ise.log.operation.type keyword
cisco_ise.log.operation_counters.counters flattened
cisco_ise.log.operation_counters.original text
cisco_ise.log.operation_message.text keyword
cisco_ise.log.original.user.name keyword
cisco_ise.log.policy.type keyword
cisco_ise.log.port keyword
cisco_ise.log.portal.name keyword
cisco_ise.log.posture.assessment.status keyword
cisco_ise.log.privilege.level long
cisco_ise.log.probe keyword
cisco_ise.log.profiler.server keyword
cisco_ise.log.protocol keyword
cisco_ise.log.psn.hostname keyword
cisco_ise.log.radius.flow.type keyword
cisco_ise.log.radius.packet.type keyword
cisco_ise.log.radius_identifier long
cisco_ise.log.radius_packet.type keyword
cisco_ise.log.request.latency long
cisco_ise.log.request.received_time date
cisco_ise.log.request_response.type keyword
cisco_ise.log.response flattened
cisco_ise.log.segment.number long
cisco_ise.log.segment.total long
cisco_ise.log.selected.access.service keyword
cisco_ise.log.selected.authentication.identity_stores keyword
cisco_ise.log.selected.authorization.profiles keyword
cisco_ise.log.sequence.number long
cisco_ise.log.server.name keyword
cisco_ise.log.server.type keyword
cisco_ise.log.service.argument keyword
cisco_ise.log.service.name keyword
cisco_ise.log.service.type keyword
cisco_ise.log.session.timeout long
cisco_ise.log.severity.level long
cisco_ise.log.software.version keyword
cisco_ise.log.state text
cisco_ise.log.static.assignment boolean
cisco_ise.log.status keyword
cisco_ise.log.step keyword
cisco_ise.log.step_data keyword
cisco_ise.log.step_latency keyword
cisco_ise.log.sysstats.acs.process.health flattened
cisco_ise.log.sysstats.cpu.count long
cisco_ise.log.sysstats.process_memory_mb long
cisco_ise.log.sysstats.utilization.cpu double
cisco_ise.log.sysstats.utilization.disk.io double
cisco_ise.log.sysstats.utilization.disk.space keyword
cisco_ise.log.sysstats.utilization.load_avg double
cisco_ise.log.sysstats.utilization.memory double
cisco_ise.log.sysstats.utilization.network keyword
cisco_ise.log.tls.cipher keyword
cisco_ise.log.tls.version keyword
cisco_ise.log.total.authen.latency long
cisco_ise.log.total.failed_attempts long
cisco_ise.log.total.failed_time long
cisco_ise.log.tunnel.medium.type keyword
cisco_ise.log.tunnel.private.group_id keyword
cisco_ise.log.tunnel.type keyword
cisco_ise.log.type keyword
cisco_ise.log.undefined_52 keyword
cisco_ise.log.usecase keyword
cisco_ise.log.user.type keyword
cisco_ise.log.workflow flattened
client.geo.city_name City name. keyword
client.geo.continent_code Two-letter code representing continent’s name. keyword
client.geo.continent_name Name of the continent. keyword
client.geo.country_iso_code Country ISO code. keyword
client.geo.country_name Country name. keyword
client.geo.location Longitude and latitude. geo_point
client.geo.name User-defined description of a location, at the level of granularity they care about. Could be the name of their data centers, the floor number, if this describes a local physical entity, city names. Not typically used in automated geolocation. keyword
client.geo.postal_code Postal code associated with the location. Values appropriate for this field may also be known as a postcode or ZIP code and will vary widely from country to country. keyword
client.geo.region_iso_code Region ISO code. keyword
client.geo.region_name Region name. keyword
client.geo.timezone The time zone of the location, such as IANA time zone name. keyword
client.ip IP address of the client (IPv4 or IPv6). ip
client.mac MAC address of the client. The notation format from RFC 7042 is suggested: Each octet (that is, 8-bit byte) is represented by two [uppercase] hexadecimal digits giving the value of the octet as an unsigned integer. Successive octets are separated by a hyphen. keyword
client.port Port of the client. long
client.user.name Short name or login of the user. keyword
client.user.name.text Multi-field of client.user.name. match_only_text
cloud.account.id The cloud account or organization id used to identify different entities in a multi-tenant environment. Examples: AWS account id, Google Cloud ORG Id, or other unique identifier. keyword
cloud.availability_zone Availability zone in which this host is running. keyword
cloud.image.id Image ID for the cloud instance. keyword
cloud.instance.id Instance ID of the host machine. keyword
cloud.instance.name Instance name of the host machine. keyword
cloud.machine.type Machine type of the host machine. keyword
cloud.project.id Name of the project in Google Cloud. keyword
cloud.provider Name of the cloud provider. Example values are aws, azure, gcp, or digitalocean. keyword
cloud.region Region in which this host is running. keyword
container.id Unique container id. keyword
container.image.name Name of the image the container was built on. keyword
container.labels Image labels. object
container.name Container name. keyword
data_stream.dataset Data stream dataset. constant_keyword
data_stream.namespace Data stream namespace. constant_keyword
data_stream.type Data stream type. constant_keyword
destination.address Some event destination addresses are defined ambiguously. The event will sometimes list an IP, a domain or a unix socket. You should always store the raw address in the .address field. Then it should be duplicated to .ip or .domain, depending on which one it is. keyword
destination.as.number Unique number allocated to the autonomous system. The autonomous system number (ASN) uniquely identifies each network on the Internet. long
destination.as.organization.name Organization name. keyword
destination.as.organization.name.text Multi-field of destination.as.organization.name. match_only_text
destination.bytes Bytes sent from the destination to the source. long
destination.domain The domain name of the destination system. This value may be a host name, a fully qualified domain name, or another host naming format. The value may derive from the original event or be added from enrichment. keyword
destination.geo.city_name City name. keyword
destination.geo.continent_code Two-letter code representing continent’s name. keyword
destination.geo.continent_name Name of the continent. keyword
destination.geo.country_iso_code Country ISO code. keyword
destination.geo.country_name Country name. keyword
destination.geo.location Longitude and latitude. geo_point
destination.geo.name User-defined description of a location, at the level of granularity they care about. Could be the name of their data centers, the floor number, if this describes a local physical entity, city names. Not typically used in automated geolocation. keyword
destination.geo.postal_code Postal code associated with the location. Values appropriate for this field may also be known as a postcode or ZIP code and will vary widely from country to country. keyword
destination.geo.region_iso_code Region ISO code. keyword
destination.geo.region_name Region name. keyword
destination.geo.timezone The time zone of the location, such as IANA time zone name. keyword
destination.ip IP address of the destination (IPv4 or IPv6). ip
destination.nat.ip Translated ip of destination based NAT sessions (e.g. internet to private DMZ) Typically used with load balancers, firewalls, or routers. ip
destination.nat.port Port the source session is translated to by NAT Device. Typically used with load balancers, firewalls, or routers. long
destination.packets Packets sent from the destination to the source. long
destination.port Port of the destination. long
destination.user.name Short name or login of the user. keyword
destination.user.name.text Multi-field of destination.user.name. match_only_text
ecs.version ECS version this event conforms to. ecs.version is a required field and must exist in all events. When querying across multiple indices — which may conform to slightly different ECS versions — this field lets integrations adjust to the schema version of the events. keyword
event.category This is one of four ECS Categorization Fields, and indicates the second level in the ECS category hierarchy. event.category represents the "big buckets" of ECS categories. For example, filtering on event.category:process yields all events relating to process activity. This field is closely related to event.type, which is used as a subcategory. This field is an array. This will allow proper categorization of some events that fall in multiple categories. keyword
event.code Identification code for this event, if one exists. Some event sources use event codes to identify messages unambiguously, regardless of message language or wording adjustments over time. An example of this is the Windows Event ID. keyword
event.created event.created contains the date/time when the event was first read by an agent, or by your pipeline. This field is distinct from @timestamp in that @timestamp typically contain the time extracted from the original event. In most situations, these two timestamps will be slightly different. The difference can be used to calculate the delay between your source generating an event, and the time when your agent first processed it. This can be used to monitor your agent’s or pipeline’s ability to keep up with your event source. In case the two timestamps are identical, @timestamp should be used. date
event.dataset Event dataset. constant_keyword
event.kind This is one of four ECS Categorization Fields, and indicates the highest level in the ECS category hierarchy. event.kind gives high-level information about what type of information the event contains, without being specific to the contents of the event. For example, values of this field distinguish alert events from metric events. The value of this field can be used to inform how these kinds of events should be handled. They may warrant different retention, different access control, it may also help understand whether the data is coming in at a regular interval or not. keyword
event.module Event module. constant_keyword
event.original Raw text message of entire event. Used to demonstrate log integrity or where the full log message (before splitting it up in multiple parts) may be required, e.g. for reindex. This field is not indexed and doc_values are disabled. It cannot be searched, but it can be retrieved from _source. If users wish to override this and index this field, please see Field data types in the Elasticsearch Reference. keyword
event.sequence Sequence number of the event. The sequence number is a value published by some event sources, to make the exact ordering of events unambiguous, regardless of the timestamp precision. long
event.type This is one of four ECS Categorization Fields, and indicates the third level in the ECS category hierarchy. event.type represents a categorization "sub-bucket" that, when used along with the event.category field values, enables filtering events down to a level appropriate for single visualization. This field is an array. This will allow proper categorization of some events that fall in multiple event types. keyword
host.architecture Operating system architecture. keyword
host.containerized If the host is a container. boolean
host.domain Name of the domain of which the host is a member. For example, on Windows this could be the host’s Active Directory domain or NetBIOS domain name. For Linux this could be the domain of the host’s LDAP provider. keyword
host.geo.city_name City name. keyword
host.geo.continent_code Two-letter code representing continent’s name. keyword
host.geo.continent_name Name of the continent. keyword
host.geo.country_iso_code Country ISO code. keyword
host.geo.country_name Country name. keyword
host.geo.location Longitude and latitude. geo_point
host.geo.name User-defined description of a location, at the level of granularity they care about. Could be the name of their data centers, the floor number, if this describes a local physical entity, city names. Not typically used in automated geolocation. keyword
host.geo.postal_code Postal code associated with the location. Values appropriate for this field may also be known as a postcode or ZIP code and will vary widely from country to country. keyword
host.geo.region_iso_code Region ISO code. keyword
host.geo.region_name Region name. keyword
host.geo.timezone The time zone of the location, such as IANA time zone name. keyword
host.hostname Hostname of the host. It normally contains what the hostname command returns on the host machine. keyword
host.id Unique host id. As hostname is not always unique, use values that are meaningful in your environment. Example: The current usage of beat.name. keyword
host.ip Host ip addresses. ip
host.mac Host mac addresses. keyword
host.name Name of the host. It can contain what hostname returns on Unix systems, the fully qualified domain name, or a name specified by the user. The sender decides which value to use. keyword
host.os.build OS build information. keyword
host.os.codename OS codename, if any. keyword
host.os.family OS family (such as redhat, debian, freebsd, windows). keyword
host.os.kernel Operating system kernel version as a raw string. keyword
host.os.name Operating system name, without the version. keyword
host.os.name.text Multi-field of host.os.name. text
host.os.platform Operating system platform (such centos, ubuntu, windows). keyword
host.os.version Operating system version as a raw string. keyword
host.type Type of host. For Cloud providers this can be the machine type like t2.medium. If vm, this could be the container, for example, or other information meaningful in your environment. keyword
input.type Input type keyword
log.file.device_id ID of the device containing the filesystem where the file resides. keyword
log.file.fingerprint The sha256 fingerprint identity of the file when fingerprinting is enabled. keyword
log.file.idxhi The high-order part of a unique identifier that is associated with a file. (Windows-only) keyword
log.file.idxlo The low-order part of a unique identifier that is associated with a file. (Windows-only) keyword
log.file.inode Inode number of the log file. keyword
log.file.path Full path to the log file this event came from, including the file name. It should include the drive letter, when appropriate. If the event wasn’t read from a log file, do not populate this field. keyword
log.file.vol The serial number of the volume that contains a file. (Windows-only) keyword
log.level Original log level of the log event. If the source of the event provides a log level or textual severity, this is the one that goes in log.level. If your source doesn’t specify one, you may put your event transport’s severity here (e.g. Syslog severity). Some examples are warn, err, i, informational. keyword
log.logger The name of the logger inside an application. This is usually the name of the class which initialized the logger, or can be a custom name. keyword
log.offset Log offset long
log.source.address Source address from which the log event was read / sent from. keyword
log.syslog.priority Syslog numeric priority of the event, if available. According to RFCs 5424 and 3164, the priority is 8 * facility + severity. This number is therefore expected to contain a value between 0 and 191. long
log.syslog.severity.name The Syslog numeric severity of the log event, if available. If the event source publishing via Syslog provides a different severity value (e.g. firewall, IDS), your source’s text severity should go to log.level. If the event source does not specify a distinct severity, you can optionally copy the Syslog severity to log.level. keyword
message For log events the message field contains the log message, optimized for viewing in a log viewer. For structured logs without an original message field, other fields can be concatenated to form a human-readable summary of the event. If multiple messages exist, they can be combined into one message. match_only_text
network.protocol In the OSI Model this would be the Application Layer protocol. For example, http, dns, or ssh. The field value must be normalized to lowercase for querying. keyword
related.hosts All hostnames or other host identifiers seen on your event. Example identifiers include FQDNs, domain names, workstation names, or aliases. keyword
related.ip All of the IPs seen on your event. ip
related.user All the user names or other user identifiers seen on the event. keyword
server.address Some event server addresses are defined ambiguously. The event will sometimes list an IP, a domain or a unix socket. You should always store the raw address in the .address field. Then it should be duplicated to .ip or .domain, depending on which one it is. keyword
server.mac MAC address of the server. The notation format from RFC 7042 is suggested: Each octet (that is, 8-bit byte) is represented by two [uppercase] hexadecimal digits giving the value of the octet as an unsigned integer. Successive octets are separated by a hyphen. keyword
service.type The type of the service data is collected from. The type can be used to group and correlate logs and metrics from one service type. Example: If logs or metrics are collected from Elasticsearch, service.type would be elasticsearch. keyword
source.address Some event source addresses are defined ambiguously. The event will sometimes list an IP, a domain or a unix socket. You should always store the raw address in the .address field. Then it should be duplicated to .ip or .domain, depending on which one it is. keyword
source.as.number Unique number allocated to the autonomous system. The autonomous system number (ASN) uniquely identifies each network on the Internet. long
source.as.organization.name Organization name. keyword
source.as.organization.name.text Multi-field of source.as.organization.name. match_only_text
source.bytes Bytes sent from the source to the destination. long
source.domain The domain name of the source system. This value may be a host name, a fully qualified domain name, or another host naming format. The value may derive from the original event or be added from enrichment. keyword
source.geo.city_name City name. keyword
source.geo.continent_code Two-letter code representing continent’s name. keyword
source.geo.continent_name Name of the continent. keyword
source.geo.country_iso_code Country ISO code. keyword
source.geo.country_name Country name. keyword
source.geo.location Longitude and latitude. geo_point
source.geo.name User-defined description of a location, at the level of granularity they care about. Could be the name of their data centers, the floor number, if this describes a local physical entity, city names. Not typically used in automated geolocation. keyword
source.geo.postal_code Postal code associated with the location. Values appropriate for this field may also be known as a postcode or ZIP code and will vary widely from country to country. keyword
source.geo.region_iso_code Region ISO code. keyword
source.geo.region_name Region name. keyword
source.geo.timezone The time zone of the location, such as IANA time zone name. keyword
source.ip IP address of the source (IPv4 or IPv6). ip
source.nat.ip Translated ip of source based NAT sessions (e.g. internal client to internet) Typically connections traversing load balancers, firewalls, or routers. ip
source.nat.port Translated port of source based NAT sessions. (e.g. internal client to internet) Typically used with load balancers, firewalls, or routers. long
source.packets Packets sent from the source to the destination. long
source.port Port of the source. long
source.user.group.name Name of the group. keyword
source.user.name Short name or login of the user. keyword
source.user.name.text Multi-field of source.user.name. match_only_text
tags List of keywords used to tag each event. keyword
user.full_name User’s full name, if available. keyword
user.full_name.text Multi-field of user.full_name. match_only_text
user.name Short name or login of the user. keyword
user.name.text Multi-field of user.name. match_only_text
**Changelog**
Version Details Kibana version(s)
1.24.2 pass:[] Bug fix (View pull request)
Revert mapping change for cisco_av_pair that was introduced with 1.24.1.
 8.11.0 or higher
1.24.1 pass:[] Bug fix (View pull request)
Fix multiple pipeline processing issues.
 8.11.0 or higher
1.24.0 pass:[] Enhancement (View pull request)
Improve ECS mappings by setting client.mac and event.outcome.
 8.11.0 or higher
1.23.2 pass:[] Bug fix (View pull request)
Use triple-brace Mustache templating when referencing variables in ingest pipelines.
 8.11.0 or higher
1.23.1 pass:[] Bug fix (View pull request)
Use triple-brace Mustache templating when referencing variables in ingest pipelines.
 8.11.0 or higher
1.23.0 pass:[] Enhancement (View pull request)
Allow @custom pipeline access to event.original without setting preserve_original_event.
 8.11.0 or higher
1.22.4 pass:[] Bug fix (View pull request)
Improve handling of empty data fields
 8.7.1 or higher
1.22.3 pass:[] Enhancement (View pull request)
Fix the Cisco_ISE toggle description for filestream input
 8.7.1 or higher
1.22.2 pass:[] Enhancement (View pull request)
Handle logs that start with ISO8601 timestamp
 8.7.1 or higher
1.22.1 pass:[] Enhancement (View pull request)
Make Cisco ISE syslog priority field optional
 8.7.1 or higher
1.22.0 pass:[] Enhancement (View pull request)
Update package spec to 3.0.3.
 8.7.1 or higher
1.21.4 pass:[] Bug fix (View pull request)
Remove duplicate event.code 60077 from list for category mapping.
 8.7.1 or higher
1.21.3 pass:[] Bug fix (View pull request)
Fix ingest pipeline conditional field handling.
 8.7.1 or higher
1.21.2 pass:[] Enhancement (View pull request)
Changed owners
 8.7.1 or higher
1.21.1 pass:[] Bug fix (View pull request)
Fix exclude_files pattern.
 8.7.1 or higher
1.21.0 pass:[] Enhancement (View pull request)
Handle CISE-Alarm events.
 8.7.1 or higher
1.20.0 pass:[] Enhancement (View pull request)
ECS version updated to 8.11.0.
 8.7.1 or higher
1.19.0 pass:[] Enhancement (View pull request)
Improve event.original check to avoid errors if set.
 8.7.1 or higher
1.18.0 pass:[] Enhancement (View pull request)
Add field event.code to capture the cisco_ise.log.message.code.
 8.7.1 or higher
1.17.0 pass:[] Enhancement (View pull request)
Adapt fields for changes in file system info
 8.7.1 or higher
1.16.0 pass:[] Enhancement (View pull request)
ECS version updated to 8.10.0.
 8.7.1 or higher
1.15.0 pass:[] Enhancement (View pull request)
The format_version in the package manifest changed from 2.11.0 to 3.0.0. Removed dotted YAML keys from package manifest. Added owner.type: elastic to package manifest.
 8.7.1 or higher
1.14.0 pass:[] Enhancement (View pull request)
Add tags.yml file so that integration’s dashboards and saved searches are tagged with "Security Solution" and displayed in the Security Solution UI.
 8.7.1 or higher
1.13.0 pass:[] Enhancement (View pull request)
Update package-spec to 2.10.0.
 8.7.1 or higher
1.12.0 pass:[] Enhancement (View pull request)
Add support for filestream input.
 8.7.1 or higher
1.11.1 pass:[] Bug fix (View pull request)
Add missing ECS field mappings
 8.7.1 or higher
1.11.0 pass:[] Enhancement (View pull request)
Update package to ECS 8.9.0.
 8.7.1 or higher
1.10.0 pass:[] Enhancement (View pull request)
Convert dashboard to lens.
 8.7.1 or higher
1.9.0 pass:[] Enhancement (View pull request)
Ensure event.kind is correctly set for pipeline errors.
 7.17.0 or higher
8.0.0 or higher
1.8.0 pass:[] Enhancement (View pull request)
Update package to ECS 8.8.0.
 7.17.0 or higher
8.0.0 or higher
1.7.0 pass:[] Enhancement (View pull request)
Update package to ECS 8.7.0.
 7.17.0 or higher
8.0.0 or higher
1.6.1 pass:[] Enhancement (View pull request)
Added categories and/or subcategories.
 7.17.0 or higher
8.0.0 or higher
1.6.0 pass:[] Enhancement (View pull request)
Update package to ECS 8.6.0.
 7.17.0 or higher
8.0.0 or higher
1.5.0 pass:[] Enhancement (View pull request)
Add udp_options to the UDP input.
 7.17.0 or higher
8.0.0 or higher
1.4.0 pass:[] Enhancement (View pull request)
Update Aggregation visualizations to Lens, Add an on_failure processor to the convert and date processors, remove unnecessary white spaces, and convert double quotes to single quotes.
 7.17.0 or higher
8.0.0 or higher
1.3.0 pass:[] Enhancement (View pull request)
Enhancements, refacturing and bugfixes
 7.17.0 or higher
8.0.0 or higher
1.2.0 pass:[] Enhancement (View pull request)
Update package to ECS 8.5.0.
 7.17.0 or higher
8.0.0 or higher
1.1.2 pass:[] Bug fix (View pull request)
Fix handling of IdentityPolicyMatchedRule and IdentitySelectionMatchedRule.
 7.17.0 or higher
8.0.0 or higher
1.1.1 pass:[] Bug fix (View pull request)
Remove duplicate fields.
 7.17.0 or higher
8.0.0 or higher
1.1.0 pass:[] Enhancement (View pull request)
Allow non-numeric task ID fields to be ingested
 7.17.0 or higher
8.0.0 or higher
1.0.0 pass:[] Enhancement (View pull request)
Make GA
 7.17.0 or higher
8.0.0 or higher
0.3.0 pass:[] Enhancement (View pull request)
Update package to ECS 8.4.0.
 —
0.2.0 pass:[] Enhancement (View pull request)
Update package to ECS 8.3.0.
 —
0.1.0 pass:[] Enhancement (View pull request)
Initial draft of the package.
 —